Sikkens Cetol Door & Window is a high-performance finish for specialty applications such as Doors, Windows and Garage Doors. The alkyd high-solids formulation offers optimum protection and a distinctive look for these unique areas. A combination of Translucent Iron Oxide Pigments and UV Absorbers gives high performance UV protection preventing graying and deterioration. Door & Window has excellent micro porosity and flexibility that minimizes blistering and cracking due to expansion and contraction or moisture build up. Sikkens-Door-Window/Sikkens-Door-Window-pail.jpg Sikkens Cetol Door & Window Sikkens Cetol Door & Window
Same Sikkens formula…… a new name!
Sikkens Door and Window is a high performance finish for specialty applications such as exterior wood trim and doors. This alkyd high solids formulation offers optimum protection and a distinctive look for these unique areas. The inclusion of translucent iron oxide pigments and UV absorbers gives excellent UV protection and color retention. Sikkens ProLuxe Cetol Door & Window creates a protective film while giving the signature distinctive look of Sikkens ProLuxe Wood Finishes.
Product Type: Oil-based, alkyd resin formula
Uses: Doors, wood window frames, garage doors, and fiberglass
General surface preparation
WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear an NIOSHapproved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
Before starting, test your color choice on a small area, applying all coats required.
NOTE: Tannin containing woods such as redwood, red cedar, mahogany, douglas fir, etc. contain tannic acid which tends to migrate to the surface and discolor the stain, especially noticeable when using white or light colors. The discoloration is not harmful and can usually be removed. Apply a cleaning solution of four (4) ounces of oxalic acid to one gallon of warm water using a garden sprayer or a heavy nap roller cover. Allow solution to dwell on surface for 20 minutes then thoroughly rise with clean water. Do not allow solution to dry on wood surface.
@ 77°F (25°C) & 50% RH:
Dries to touch in approximately 6 hours. Dries to recoat in 24 hours and additional coats may increase these times. Wait 7 days before using furniture. Low temperature, high humidity, thick films or poor ventilation will increase these times. Avoid heavy abrasions immediately following application.
Sikkens ProLuxe Cetol Door and Window is available for shipment by ground only and is shipped via FedEx to the continental USA; with the exception of the following areas that are not approved for Sikkens Proluxe Cetol Door and Window use due to VOC regulations:
Please Note: Sikkens ProLuxe Cetol Door and Window cannot be sold to:
Please Note: South Coast Air Quality Management District of California has an exemption for locations registered above 4,000 feet.
Please click here to determine if your address is included in this exemption. To find out which California Air Quality District you are in click here.
Click here for this product’s MSDS
There are no reviews yet.
Not that bad
Your Review *