BBR Paint & Urethane Stripper quart

Blue Bear Soy Gel™ Paint & Urethane Stripper

Today, our customers know that finding the best paint remover means opting for the easier, safer method of Blue Bear Soy Gel™ Paint and Urethane Stripper.  Soy Gel is an industrial strength, consumer friendly, paint, varnish and urethane remover.

FacebooktwitterpinterestmailFacebooktwitterpinterestmail
Clear

Product Description

FacebooktwitterpinterestmailFacebooktwitterpinterestmail

Unlike those non-gelled, caustic and old-fashioned paint removers, Soy Gel™ Paint & Urethane Stripper encapsulates the surface of your furniture, walls or floors in its thick gel, preventing lead or other hazardous particles from escaping into the air.  Soy Gel™ is 100% biodegradable, and is safe for your hands, your home and  your antiquesAfter your paint removal project is finished, cleanup is a breeze using soap and water, or a simple degreaser such as Blue Bear’s Emerge™.  Trying is believing, so give the best paint remover you’ll ever find a trial run: you’ll be a fan for life.

Uses: Removing urethanes, paint, epoxies, varnishes, latex coatings, stains, and enamels from wood and concrete surfaces

  • GHS Compliant
  • No sanding
  • No petroleum based ingredients
  • No toxic fumes
  • Safely removes lead based paint
  • Safe to use on wood, brick, stone, metal, plaster, concrete, and many other surfaces
  • Made With 100% USA  grown soybeans
  • Low Odor
  • Biodegradable
  • Gelled formula creates easy cling power
  • Contains no methylene chloride
  • Not an alkaline based stripper
  • Low evaporation rate makes it possible to remove several layers of paint in one application
  • For use both indoors and outdoors

 

Coverage

Horizontal Surfaces 125 square feet per gallon ( Determined by substrate to be removed)
Vertical Surfaces 75 square feet per gallon ( Determined by substrate to be removed)

 

Soy Gel Paint Stripper

Dwell Time

Latex and Urethanes 10-60  minutes
Epoxies and Multiple Layers of Paint or Stain 3-24 hours (cover with light plastic drop cloth for extended dwell times)

 

Product Facts for Blue Bear Soy Gel™ Paint & Urethane Stripper

Application Tools
  • Brush, piston pump airless sprayer with tip of 519 or clean straw broom
  • Light plastic drop cloth
  • For large application areas, use a professional airless sprayer or a 4-stage HVLP sprayer (tip size 19-21)
  • For tough coating or numerous layers, use a notched 1/2″ squeegee or 1/4″ gauge rake. Square footage will be greatly reduced
  • When used outdoors, cover with a 2mil or thicker plastic to help keep Soy Gel™ Paint & Urethane Stripper wet and working
Clean Up Tools
  • Use Blue Bear Emerge™ Cleaner & Degreaser Concentrate or water and a scrub brush, scraper, industrial wet vac, mop, or power washer to clean remaining thin residue
  • Remove excess coating(s) and Soy Gel™ before using a power washer for final cleaning
  • Allow surface to dry before further preparations
Special Instructions
  • Caution! Always cover vinyl siding when using Soy Gel. Soy Gel can cause damage to vinyl siding
  • Due to variances in concrete surfaces and conditions, test in a small, inconspicuous area before using on complete project
  • Do not use on plastic, PVC, rubber or drywall
  • When used outdoors, protect plant and vegetation with a plastic drop cloth
  • Always use care to prevent overspray from getting on surfaces other than the one being prepped
  • Be careful not to apply too thin a coat.
  • Soy Gel™ Paint & Urethane Stripper will not raise wood grain, but applying too much water when rinsing wood surfaces can do so

 

 

Application

  1. Due to variances in concrete surfaces and conditions, test in a small, inconspicuous area before using on complete project.
  2. Apply a thick, even layer (1/16th to 1/8th inch ) of Soy Gel™ Paint & Urethane Stripper to the coating to be removed by pouring, brushing, or airless sprayer (piston pumped with tip of 519 or similar). If applying with brush, do not apply as you would paint, just glob Soy Gel™ Paint & Urethane Stripper on the surface. Do not brush or scrape the surface until Soy Gel™ Paint & Urethane Stripper has enough dwell time for the coating type you are removing.
  3. Check the progress of the coating removal by using a scraper to see if the coating is softened down to the surface. If not, wait longer and recheck.
  4. Soy Gel™ Paint & Urethane Stripper will remain wet and working for several hours. Longer is better. Let the stripper do the work!
  5. Soy Gel™ Paint & Urethane Stripper is left to sit outdoors; cover with a light plastic drop cloth to prolong the moisture content of the gel.
  6. Once the coating is softened, remove it with a scraper, industrial wet vacuum, or other stripping tool.
  7. Reapply stripper, if necessary. Repeat steps above.

Removing lead-based paint: During the removal of lead based paint, the lead paint residue becomes encapsulated in the gel, preventing airborne lead particles, and allowing for safe disposalDispose residue according to local regulations.

Clean Up

  1. After use, clean remaining thin residue with Emerge™ Degreaser, using a scrub brush and/or mop or power washer.
  2. Make sure to scrape or vacuum excess removed coating and Soy Gel™ Paint & Urethane Stripper before using a power washer for final cleaning.
  3. Always use care to prevent overspray from getting on surfaces other than the one being worked on.
  4. Allow surface to dry before further preparations.

 

Shipping

Blue Bear Soy Gel™ Paint & Urethane Stripper is available for shipment throughout the USA  via FedEx and international destinations.

 

 


msdsClick here for this product’s MSDS

 

FacebooktwitterpinterestmailFacebooktwitterpinterestmail

Reviews

There are no reviews yet.

Be the first to review “Blue Bear Soy Gel™ Paint & Urethane Stripper”