MX-3 Mildewcide

WHAT IS MX-3 COMPLETE MILDEWCIDE?

MX-3 Mildewcide is a new cutting edge technology paint and stain additive designed to prevent the growth of mold, mildew and algae for 3 years. The product provides broad spectrum fungicidal capability without hurting the environment. MX-3 Advanced Mildewcide is compatible with virtually every water and oil based paint and stain formulation.

WHAT ARE THE ADVANTAGES OF
MX-3 COMPLETE MILDEWCIDE?

No Odor
Low VOCs Approved for use in all 50 states
Minimum Paint/Stain Discoloration
Designed for use in virtually every water and oil based paint and stain product
Approved for Interior and Exterior Use
Excellent Freeze/Thaw Stability
EPA Registered.
Approved for consumer and professional use
Mixes easily
Broad Spectrum Protection

HOW IS MX-3 COMPLETE MILDEWCIDE PACKAGED?

MX-3 Advanced Mildewcide is stocked by Logfinish.com in 7.5 OZ plastic containers to treat 5 Gallons of paint or stain.

WHERE SHOULD MX-3 COMPLETE MILDEWCIDE BE USED?

MX-3 should be added to exterior finishes when a home is located on a river, stream or lake. It should also be used on homes located in forested areas where little sun reaches the home. MX-3 should also be used on homes located in moist climates (i.e. Louisiana, Coastal Texas, Mississippi, Florida, Georgia, South Carolina, Hawaii, Coastal Washington and Oregon) If previous finishes have had problems with the growth of mold and mildew, always add MX-3 Advanced. On the interior of homes use this product in Bathroom, Spa Rooms, Greenhouses, Basements and any other areas with lots of moisture and poor humidity control.

Important Notice: MX-3 COMPLETE MILDEWCIDE CAN NOT BE USED IN LIFELINE ADVANCE SATIN OR GLOSS TOPCOAT.

HOW DO YOU MIX MX-3 WITH YOUR FINISH?

Just pour the entire contents of the 7.5 ounce bottle of MX-3 Mildewcide into five gallons of paint or stain and shake or stir thoroughly for 2-3 minutes. Apply the coating per the manufacturer's directions. It is a violation of federal law to use MX-3 Mildewcide in a manner inconsistent with its labeling. MX-3 is designed to control surface mold and mildew and should be used only in the final coat of finish coat being applied at any one time.

WHO DISTRIBUTES MX-3 COMPLETE MILDEWCIDE?

MX-3 Advanced Mildewcide is nationally distributed by Logfinish.com. To order your MX-3 securely on line, visit us at www.logfinish.com and click on stain additives. Our customer service center is open from 9AM to 7PM Eastern time (6AM to 4PM Pacific) Monday through Friday. To place your order by phone call toll free at 888-208-2248. Fax orders are accepted at 828-625-2077.