WHAT IS OUTLAST WOOD SEAL CONCENTRATE?

WHAT ARE THE ADVANTAGES OF USING OUTLAST WOOD SEAL?

• Excellent water repellency·
• Halts warping, checking and the splitting of unprotected wood that swells and shrinks under the influence of rain and sun.·
• Resists the growth of mold and mildew·
• Never hides the grain or beauty of natural wood surfaces

HOW MUCH AREA WILL OUTLAST WOOD SEAL COVER?

A one gallon pail of Outlast that has been mixed with four gallons of Mineral Spirits will cover 1000 SF of outdoor wood with a single coat. The factory recommends a two coat initial application of Outlast so the net coverage of two coats of Outlast mixed with Mineral Spirits is 500 SF of outdoor wood.

WHAT COLORS IS OUTLAST WOOD SEAL AVAILABLE IN?

Outlast is available in three colors. The color samples shown below indicate Outlast applied to CCA treated Southern Yellow Pine Decking.

Golden Toner
Red Maple Toner
Walnut Toner

HOW DO YOU APPLY OUTLAST WOOD SEAL?

Never apply Outlast Wood Seal without dilution. Mix each gallon of Outlast concentrate with four gallons of Mineral Spirits.

1. Prepare the wood for treatment by cleaning thoroughly with X-180 Weathered Wood Restorer. Use a pressure washer set between 800 and 1200 psi to remove deposits of mold and mildew. Allow the wood to dry.
2. Dilute each gallon of Outlast Wood Seal concentrate with four gallons of Mineral Spirits. Mix thoroughly.
3. It is important that Outlast be completely mixed with Mineral Spirits. Use of a mixing blade on a hand drill or similar apparatus is recommended.
4. Apply the diluted Outlast with a brush, roller, or staining pad.
5. Although Outlast will not settle in its concentrated state, it may settle after dilution. During application stir Outlast regularly every 15 minutes.
6. A second coat of Outlast should be applied within three to six hours depending on the heat and humidity. Two coats of Outlast will ensure long lasting beauty.
7. Allow to dry overnight before walking on decks or using wood furniture.

WHAT CAUTION STATEMENTS SHOULD I BE AWARE OF?

Avoid contact with eyes as irritation may occur. FIRST AID: In case of contact, immediately flush with water for at least 15 minutes. Get medical attention if irritation persists. Please refer to the MSDS for more specific safety information. KEEP OUT OF THE REACH OF CHILDREN. For spills, leaks or Medical Emergencies, call Infotrac at 800-535-5053.

WHAT IS THE BEST WAY TO MAINTAIN A DECK TREATED WITH OUTLAST WOOD SEAL?

Apply Two Coats of Outlast the first year, then one coat every other year or so as needed. Atmospheric pollutants and ordinary abrasive foot traffic will leave dirt on deck surfaces. Rainwater alone does not wash such deposits away. After a consistent rain, squeegee the deck surface. (Note: On stubborn dirt areas use a mild dish detergent and water solution with a mild brushing action to remove dirt, and then rinse with water.) In the spring and fall wash your deck with X-180 Weathered Wood Restorer.

ARE SAMPLE KITS OF OUTLAST ARE AVAILABLE?

Yes! Logfinish.com provides the best sample kits in the Log Home Finishing industry.

Telephone requests for Outlast sample kits are also accepted Monday through Friday from 9AM to 7 PM Eastern ( 6AM to 4PM Pacific) . Our toll free order desk number is 888-208-2248. You can also reach us by fax at 828-625-2077.

HOW DO I ORDER OUTLAST WOOD SEAL?

Outlast Wood Seal Concentrate is nationally distributed by Logfinish.com from our warehouses in North Carolina and California. Use our secure online order system 24/7 or contact us by phone, fax, or e-mail. Our offices are open Monday-Friday from 9:00 AM to 700 PM Eastern Time. Our toll free number is 888-208-2248. Email address is  info@logfinish.com