View our Interactive Catalog

 
Contractors Login!
 
Important Log Home Info
Download Our Catalog
Use Our Fax Order Form
What's New
View Shopping Cart
Go to Check Out
 
 
CONTRACTOR SECTION
Don't have username and password?
Click here to sign up.
 
 
 
 
Carpenter Bee Solutions | Deck Finishes | Exterior Finishes | Interior Finishes
Log Assembly | Log Caulk | Log Chinking | Log Cleaners | Log Flame Retardant
Log Pretreatment | Log Strippers | Prestained Siding/Trim | System
Stain Additives | Tools & Equipment | Wood Preservative

Sure Shine Floor Finish Gloss/Satin





 

WHAT IS SURE SHINE?

SURE SHINE is a Water Reducible Polyurethane Floor Finish which was developed specifically to protect wood floors where a durable clear finish is desired. SURE SHINE is a non-yellowing, non-flammable, low odor finish that when cured is more durable than solvent type finishes. SURE SHINE dries to re-coat within 1 hour and provides superior resistance to alcohol, water, and most household chemicals. SURE-SHINE is available in Gloss and Satin finishes

WHAT ARE THE ADVANTAGES OF SURE SHINE FLOOR FINISH?

  • Dries in one hour

  • Multiple coats can be applied same day

  • No toxic fumes

  • Clear non-yellowing formulation

  • Abrasion resistant

  • Detergent and water cleanup

HOW DO YOU PREPARE YOUR FLOORS FOR SURE SHINE?

Unfinished Wood Floors should be dry, free from all dust, dirt, oils, and grease. For best results, wipe the entire area to be finished with a tack rag prior to applying finish.

WHAT IS THE BEST WAY TO APPLY SURE SHINE?

Use a synthetic pad applicator, synthetic bristle brush or foam brush. DO NOT USE ROLLER or other applicator that will apply thick coats.

SURE SHINE APPLICATION INSTRUCTIONS:

Stir contents before using, do not shake or agitate as this causes excessive foam.

STEP 1: Apply first coat as a sealer without thinning.

STEP 2: Apply finish in the same direction as the wood grain with approved applicator in smooth, even strokes. Always apply thin coats.

STEP 3: Allow product to dry, and then sand lightly with fine sandpaper or screen. Do not allow sanding procedure to build up excessive heat.

RE-COAT:Allow product to dry for 1-2 hours between coats and sand lightly between coats. A minimum of three coats is recommended for interior surfaces. Light traffic may be allowed within 12 hours. Avoid placing rugs or moving furniture over finish for about one week.

CLEAN UP: Clean all tools with soap and warm water as soon as possible after use.

WHAT IS THE ESTIMATED COVERAGE WITH SURE SHINE?

Between 600 and 800 square feet per gallon per coat.

HOW IS SURE SHINE SHIPPED?

SURE SHINE is shipped in D.O.T.-approved one gallon plastic buckets that are packaged in strong corrugated cartons. 99% of our orders are shipped within 24 hours of order receipt via UPS Groundtrack.

HOW DO I ORDER SURE SHINE?

SURE SHINE Floor Finish is nationally distrbuted by Logfinish.com from our warehouses in North Carolina and California. To order SURE SHINE use our secure online order system 24/7 or contact us by phone, fax, or e-mail. Our offices are open Monday-Friday from 9:00 AM to 7:00 PM Eastern Time (6:00 AN to 4:00PM Pacific). Our toll free number is 888-208-2248. Our e-mail address is info@logfinish.com.
 



QTY:
QTY:




Is a MSDS available for this product? Yes,
Click here.

Search
 
McAfee
Secure sites help keep you safe from identity theft, credit card fraud,
spyware, spam, viruses and online scams
 
Translate into:

French

Spanish
 
 
Best Information on the Web
99.5% of our orders ship within 24 Hours
We sell only the products with the best field performance
Best Prices
Order $700 or more of Logfinish Products and your shipping is FREE!
Free Adobe Acrobat