Conceal Textured Caulk for Wood delivers performance that’s hard to see. Conceal’s 7 colors blend in with the most popular stains used on log and wood homes. Conceal Textured Caulk for Wood’s light texture simulates the natural roughness of wood. The combination of color and texture makes it hard to see where the caulking ends and the wood begins. Instead, they just blend together. Although the caulking is hard to see, Conceal delivers performance.
Conceal Textured Caulk for Wood Features
- Is easy to apply with a standard caulking gun
- Has superior elongation, memory and adhesion
- Eliminates air and water infiltration
- Ideal for exterior and interior use
- Remains flexible long term to allow for log movement
- Cleans up with soap and water
- Is resistant to rainfall in 1-4 hours
- Has a very low VOC formula
- Frontier Gold
- Harvest Wheat
- Gold Tone
- Brown Tone
- Red Tone
- Grizzly Brown
|Joint Size||5 GAL Pail||30 OZ Tube||10.5 OZ Tube|
|1/ 4 ” x 1 / 4 ”||1540 LF||70.0 LF||25.7 LF|
|3 / 8 ” x 1 / 4 ”||875 LF||39.8 LF||14.6 LF|
|1 / 2 ” x 1 / 4 ”||750 LF||34.1 LF||12.5 LF|
|5 / 8 ” x 3 / 8 ”||410 LF||18.6 LF||6.8 LF|
|3 / 4 ” x 3 / 8 ”||280 LF||12.7 LF||4.7 LF|
|1” x 1 / 2 ”||195 LF||8.9 LF||3.3 LF|
Product Facts for Conceal Log Caulk for Wood
|Shelf Life||1 Year|
|Application Temperature||40˚F – 90˚F|
|Elongation @ Break||550%|
|Application Methods||Chink Pump|
Bulk Loading Gun
Standard Caulking Gun
Wood Must be Clean and Dry
Do Not Apply Over Old Caulk
Use Backer Rod If Possible
Surface Preparation Notes:
Best results are obtained when Conceal is applied to wood that has been previously coated with a compatible and thoroughly cured stain.
Conceal is not a chinking and should be used only in joints under 2” wide. If the joints are wider, we recommend Log Jam.
It is always best to install backer rod before caulking. Sashco strongly recommends the use of backer rod, especially if the home is new and/or the wood is subject to significant movement.
Logs tend to take on water from rain and snow through cracks and checks; therefore, it is important to pay close attention to these openings and prep and seal them properly. Note: Most small checks should not be caulked. Only the larger ones (1/4” or larger) should be sealed with backer rod and caulk.
Best Conceal Textured Caulk for Wood Application Uses:
- Log Stacking
- Filling Joints Between Logs
- Sealing Around Windows and Doors
- Filling Checks
Conceal Textured Caulk for Wood Application Notes
When using 5-gallon pails, the Cox Bulk Loading Gun should be used. Use a caulking gun when using either the 29 oz. or 10.5 oz. cartridges of Conceal Textured Caulk for Wood. When using a cartridge, cut the spout at a 45˚ angle to desired bead size. Conceal requires no heating prior to application but will dispense easier when kept warm before use.
Conceal should be tooled directly after application to ensure good adhesion and a smooth looking bead. To ease the tooling process, mist Conceal with water. Conceal may be tooled with a damp foam paint brush. Work the material smooth, tooling Conceal tightly to the surfaces. Keep a rag handy for clean up.
Conceal is Stainable with latex coatings after a minimum of 24 hours curing (longer on wider joints) and after 5 days curing with most oil-based coatings.
Clean-up & Disposal
Clean excess product off surfaces (before it cures) with a putty knife and/or a damp rag. Dispose of Conceal in accordance with local regulations. Do not dispose waste in drinking water supplies. Soap and Water may be used for cleaning hands, surfaces and equipment. Solvents are not required for clean-up