Energy Seal Log Caulk is created specifically to seal milled or scribed log homes and around joinery such as butt-joints, trim and corners. One application makes any log wall completely weather-tight. Energy Seal Log Caulk has excellent adhesion and stretch.
It is long-lasting, UV-stable and chemical-resistant. Unlike commonly used sealants which look shiny and artificial, Energy Seal Log Caulk is textured to match the visual characteristics of wood. It easily tools to a smooth, professional finish, virtually disappearing into the walls after it’s applied. It softens the lines on log walls and accepts the color of wood finishes. In fact, Energy Seal Log Caulk so closely matches your walls; most people can’t tell the seams are sealed. Both homeowners and professional contractors can easily apply Energy Seal Log Caulk.
- Highly Elastic
- Eliminates air and water infiltration
- Remains flexible to allow for log movement
- Very low VOC formula
- For exterior and interior, between logs and even tongue and groove systems
- Lightly textured appearance
- Soap and water cleanup
- Easy to apply with a standard caulking gun
NOTE: Energy Seal is not recommended for use in checks/cracks – use CheckMate 2 instead
When applied to 5/16th to 3/8” thickness
|Bead Size||11 oz||30 oz||5 gallon|
|1/2″ Gap||16 LF||48 LF||975 LF|
|¾” Gap||11 LF||32 LF||650 LF|
|1” Gap||8 LF||24 LF||490 LF|
|Over 1″ Gap||Use Perma-Chink|
Product Facts for Energy Seal Log Caulk Log Caulk
How to Choose a Color
For the least visible sealant lines: choose a sealant color that’s a shade lighter than the stain you plan to use because it’s easier to cover a lighter color sealant with a darker color stain than it is to hide a dark colored sealant with a light colored stain.
For visible sealant lines: you may apply Energy Seal Log Caulk after you stain. If you stained with an oil-base stain, you must test adhesion of Energy Seal Log Caulk after 4-8 weeks of stain curing time. If using Lifeline products it is best to apply Lifeline Advance topcoat after the Energy Seal Log Caulk. This results in a more even appearance, helps them blend in with the rest of the wall and makes sealants easier to clean.
Always double check your color choice with a free Energy Seal Log Caulk Sample Color Card, to get a real-time view of what cured Energy Seal Log Caulk looks like and find the best color match for your project.
Measuring and Calculating Linear Feet
When it comes to ordering sealants like Energy Seal Log Caulk there are two dimensions that you need to know to determine how much product you will need:
- Width of the gaps or joints. Determine gap width by:
- If it is a chink joint on a squared log it’s the average distance between upper and lower log surfaces.
- Width of the gap and size of the backer rod that determines the width of the Energy Seal Log Caulk.
- Cumulative length (linear feet) of those gaps and joints. Calculate linear feet by:
- Keep it simple by measuring one wall at a time then add all of the walls together after you have completed all individual wall calculations.
- Start by measuring the length of the wall with a tape measure.
- Count the number of joints you need to seal. Usually it is the number of log courses minus one.
- Then multiply the length of the wall by the number of joints you need to seal, this will give you the linear feet of sealant required for that wall.
- Don’t worry about subtracting the windows or doors unless they take up a substantial portion of the wall area. You will need to seal around them anyway.
- If you are planning to run a bead of sealant in the corners or other vertical seams of round logs you need to know the height of the wall then multiply the height by a factor of 1.25 to compensate for the increased surface area created by the curvature of the logs.
Once you have determined both the width of the sealant joint and total number of linear feet, go to Energy Seal Log Caulk Calculator. The calculator will tell you the number of pails required to complete your project. Use the Cox Pro Cartridge Caulk Gun to easily and precisly apply Energy Seal.
If you were thinking about using tubes consider this, the price difference between two pails of Energy Seal Log Caulk and an equal amount of material in tubes more than covers the cost of a Cox Bulk Loading Gun and Follow Plate.
- Do not apply Energy Seal Log Caulk over old caulk.
- Best to apply Energy Seal Log Caulk after walls have been cleaned and before stain is applied.
- Do not apply to oily or glass smooth surfaces.
- Some paraffin based stains and sealants may cause adhesion problems (if in doubt, test small area for adhesion).
- Caulking area must be clean, dry and free from loose or foreign materials.
- Before starting, inspect the installation of all backing materials. Where individual pieces of backing join to one another, make sure there are no gaps, ledges or discontinuities so that they don’t show through after the sealant has cured. Smooth, trim or bridge gaps with tape as necessary.
- Request a copy of “Log Home Sealant Application Guide” from LogFinish.com for information about surface preparation and sealant application
Backing materials are an integral part of a sealant system and should be used wherever possible. The overall performance of any sealant system is dependent on the use of correct application thickness and proper backing. For small joinery the most commonly used backing is round backer rod. It comes in a range of sizes and is relatively inexpensive. It is flexible it and can be pushed into a crevice without needing to be nailed or stapled. In situations where joinery is too narrow to insert some type of backing material, a narrow strip of water-resistant masking tape works well. (Avoid masking tape that wrinkles when wet because the wrinkles may show through the sealant after it has cured.) A good option is to use pinstripe tape available at most automotive supply stores. The tape is waterproof, so Energy Seal Log Caulk does not adhere to it, making it a suitable backer material. Pinstripe tape is available in widths down to 1/8”. After about 30 minutes Energy Seal Log Caulk may then be applied over the backer rod without displacing it.
- Freshly applied sealants should be protected from direct rainfall for a minimum of 24 hours. Either watch the weather or drape a newly sealed wall with plastic film. Be sure to allow some airspace between the wall and the plastic to facilitate drying.
- Avoid applying sealants in cold weather (below 40° F [4° C] ) it’s important that the logs be free of frost and dew in order to ensure that the sealant adheres tightly to the wood
- Apply when sealant and surface temperatures are between 40°F and 90°F
- Do not apply in direct sunlight
- Do not apply if rain is expected within 24 hours
- Energy Seal Log Caulk is compatible with most stains. For maximum adhesion and least visibility use Energy Seal Log Caulk on bare wood prior to staining. If Energy Seal Log Caulk is to be used over newly applied stains or topcoats, apply the product in an hidden area, wait 24 hours and test for adhesion.
- Wear old clothes and shoes. Energy Seal Log Caulk is not easily removed from fabric. Discard used rags, etc. in proper disposal containers.
- Always maintain a clean working area.
- When ready to quit for the day, leave bag or gun containing material in a moderately warm place. The open ends of the bag or gun will form a “plug“; this will prevent the rest of the material from curing.
- When ready to begin again, squeeze the plug out, discard hardened material and continue.
- When reusing an open bucket of material, be sure to remove any partially cured “skin” before filling bag or gun.
Please Note: Temperature and humidity are largely responsible for log movement. When the temperature rises, the logs will expand, and at the coldest temperature, they will contract. When you apply sealant during cold, damp conditions the logs will more than likely be at the smallest dimensions (after some normal shrinkage may have occurred). Then when the weather dries out and warms up, the sealant will normally relax. Conversely, if you apply your sealant during hot, dry conditions, the joint will be at its smallest point, and when temperatures fall or weather turns very humid, the logs may contract and put the sealant in stress. Sometimes the contraction or movement may be severe enough to tear the sealant.
- Cut the applicator tip to the desired diameter of the sealant bead you want to apply.
- Begin by holding the applicator tip firmly against the seam and apply a bead of sealant.
- Apply enough sealant to maintain a wet thickness of at least 5/16” and no more than ½” across the entire seam after tooling.
- Apply as much sealant as you can tool smooth in about 15 minutes to avoid a dried skin before final finishing.
- After the joint is filled, trowel out to approximately 3/8” thick across the entire joint, making sure there is good contact between the sealant and the wood.
- Do not spray with water at this time! Be careful to maintain proper thickness especially in corners
- All joints should be tooled by spraying a small amount of water onto the chinking and smooth to the desired finish. Always trowel in such a way as to form a good seal to the wood. Maintain a depth a little more than 1/4″, as the material will shrink slightly when cured.
Tip: Occasionally check the sealant using a toothpick to see if you are maintaining proper thickness. Once the sealant is roughly in place with air worked out of it, spray it with a light mist of water and tool smooth with a trowel or spatula.
Do not saturate the surface with water. If it begins to run you have applied too much.
Tip: If you used masking tape at the edges of the Energy Seal Log Caulk, remove it now and smooth out edges with your tool.
All logs should be clean and free of dirt, sawdust, and oil or grease. If gasket tape was supplied by home manufacturer, apply as per instructions. Then, apply a 1/4″ or 3/8″ bead directly from the caulking gun.
Continue this as logs go up.
Exterior Sealant Instead of Chinking
The depth should be no less than 1/4″ and no more than 1/2″. To provide proper two-point adhesion, always use a backer rod or a “breaker” tape prior to the application.
Sealing around Windows and Doors
Curing and Drying
Drying time and curing time are two entirely different terms. In warm or hot weather, Energy Seal Log Caulk will begin to skin over (indication of drying) in as little as ten minutes while a complete cure may take three to four weeks. Cooler weather will slow both the drying time and curing process.
Please note: If you get any sealant on the surface of the wood, be sure to wipe it off with a wet rag immediately. Dried sealant is very difficult to remove. Clean your tools and equipment with clean water occasionally during application.
- Remove masking tape.
- If properly applied, the cleanup area for Energy Seal Log Caulk should be confined to the tube and utensils used.
- Warm soap and water is sufficient for proper clean up.
Store Energy Seal Log Caulk at moderate temperatures, in a clean, dry place, out of direct sunlight. Do not allow the material to freeze. Do not store in close proximity to radiant heat sources like fireplaces or wood stoves, as the excessive heat may cause the material to start curing.
Energy Seal Log Caulk is available for shipment to all 50 states via FedEx.